UK
4
The ball 2.1
Technical specifications
Power:
40 Watt + 2 x 20 Watt Class D
Shape:
Abs enclosure conceived to compliment the drop,
the Minipod or the Micropod SE
Voltage:
100-240 VAC
LED light:
Power on, standby, mute, volume adjust
Inputs:
Stereo RCA Jack
Outputs:
Left-right for front speakers
Drive unit:
6 ½ “ long throw – 4 layer woofer
Audio response:
20Hz-20kHz
Frequency:
minus 3 db at 48 Hz, minus 6 db at 40 Hz
L,R channel noise:
< 1.0 mv
Sub channel noise:
< 1.2 mv
L,R input sensitivity:
Input @ 1kHz 450mVrms @ rate power output
Sub input sensitivity:
Input @ 1kHz 270mVrms @ rate power output
S/N L,R (rated power): >70dB
S/N sub (rated power): >70dB
THD:
<0.3% @ 1 Watt, 1% @ rate power output
L,R audio separation:
1kHz > 50dB
Functions:
Crossover frequency adjust range 60Hz to 160Hz select,
digital volume control (360 dg type)
Remote control:
Master volume, sub volume, mute, on/off
Protections:
Short-circuit protection, over current protection,
over temperature protection
The ball 2.1 remote control
Power Key:
ON, OFF (Power ON/ LED Blue light full,
Power OFF LED Blue light less bright)
Mute:
ON, OFF ( Mute ON/ LED Blue Light blinking)
Master Volume:
When adjusting the volume, the LED Light
will blink, until the volume is MAX or MIN.
Sub Volume:
When adjusting the volume, the LED Light will
blink, until the volume is MAX or MIN.
REMARK:
After 10-15 minutes without signal the ball 2.1
will go in standby mode/ LED Blue light les bright.
