1
IP CABLING TRANSMISSION – Passive
ITEM NO.: IP01H
Ethernet Switch with 4Port 10M+ 1Port 10/100M
IP01H 4 port Ethernet Switch is special design and built in 4 pieces IP01 (IP extender over coax) with BNC
interface to send and extender TCP/IP signal over coaxial cable. Used in set with IP01 at IP camera side
or any TCP/IP equipment, to send the IP signal up to 200 meters over your existing coax cable. 4 BNC
port based on 10Mbps transmission speed, 1 port RJ45 to your NVR/computer based on
10/100M
IP01H Ethernet Switch with
4Port 10Base-T+ 1Port 10/100Base
4 Port Ethernet Switch with 4 port BNC and 1 port RJ45.
RJ45 terminal support 10/100Mbps auto detect function
BNC terminal support 10Mbps, must work with IP01.
LED indication: Link/Active, Power.
Complies with standard IEEE802.3 and IEEE802.3u.
Auto MDI/MDI-X auto cross at RJ45 terminal.
Option model:
IP01 IP Extender over Coax
Send IP camera signal over existing coaxial cable.
Passive, no power required.
Exceeds 802.3 10BaseT specifications, isolating the receiver from the transmitted signal.
Transmission up to 200 meters (Max).
IP01K 4 x IP01 IP ex 1 x IP01H 4 Port Ethernet Switch Kit Package
Package include: 4 pieces x IP01, 1pcs x IP01H with power adapter.
Installation View:
Caution: IP01H unit with BNC male terminator at channel 2, 3, 4.
Do not remove the terminator if you do not use these channels. Otherwise, it will
cause this Switch not working.
