43
Output Channel Switching
Left: icon for matrix
Center upper big font for matrix name,
Center middle small font for matrix IP
Center lower small font for matrix type (4 by 4 or 10 by 10)
Right gear icon: enter Modification page
Notice: if shows
「
Specify the host does not exist
」
means the matrix not
exist
Touch the block of matrix to enter Controller page
Top right
「
Refresh
」
to renew the status of matrix
Below
「
Refresh
」
button to power on/off the matrix
The block under device are Output 1~ Output 10
(4 by 4 matrix only shows Output 1~Output 4)
Left side shows output device name
Right sideshows current input device name
Bottom left
「
Save Scene
」
to save the scenes
Bottom right
「
Load Scene
」
to load the scenes
Touch output block to enter Channel Selection page
