![background image](http://html1.mh-extra.com/html/scandomestic/sfs-242-w/sfs-242-w_user-manual_1206503033.webp)
First use
Cleaning the interior
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and some
neutral soap so as to remove the typical
smell of a brand new product, then dry
thoroughly.
Important! Do not use detergents or abra-
sive powders, as these will damage the
finish.
Turn on
Plug in the appliance, LED lighting .
Daily use
A Star class
B Display ”SF”, ”SE”, ”ht”, and the setting
temperature
C Super freezing indication light
D Energy saving indication light
E Mode button
F Lock indication light
G Setting button
Mode
When firstly push "Mode" button, the lamp
of "Sup" is lighted on, and the appliance
would be fast freezing and the LED displays
"SF" (super freezing).
When secondly push "Mode" button, the
fasting freezing lamp black out, and the
"Eco" lamp is lighted on, the appliance
would go into "Eco" mode, the appliance
will run with the setting at -16°C and the
LED will display "SE" (save energy).
When you thirdly push "mode" button,
both of lamps of "Sup" and "Eco" black out,
the appliance would be back to setting
mode by user.
The mode is cycling to change during "Sup",
"Eco", and "Setting".
Temperature Setting
Push "setting" button, the LED number
would be glistening, you could adjust the
temperature by pushing "setting" button.
The setting is cycling to change from -16°C
to -22°C. After 5 seconds, the setting tem-
perature is confirmed.
Lock
When push "mode" and "setti ng" buttons
at the same time for 3 seconds, buttons
will be locked and the lamp of lock is light-
ed on. If you want to unlock the buttons,
please push "mode" and "setting" buttons
at the same time for 3 seconds again.
Turn off
Push and hold "setting" button for 5 sec-
onds and switch off the machine. If you
want to switch on the machine, please
push and hold "setting" buttons for 5 sec-
onds again.
Displayed temperature
Important! LED always displays the setting
temperature, not real temperature.
Door Open Alarm
If miss to close door for 5 minutes, the door
open alarm will give out alarm sound which
will be three times each 5 seconds and last
5 minutes and then stop 5 minutes and
again give out alarm sound till you close
door.
High temperature alarm
After running for 3 hours and if the tem-
perature is more than -s·c, the LED will
alternately display "ht" and real tempera-
ture ("ht" means high temperature) and
give out alarm sound with frequency of
1Hz, till you push any button to stop.