TEMPERED GLASS DOORS
REVERSIBLE DOOR
ADJUSTABLE FOOT
THERMOSTAT
SHELVE
PRODUCT LABEL
FLUSH BACK DESIGN
EVAPORATION TRAY
COMPRESSOR
Tips for Refrigeration
Adjust the internal temperature according to the amount
of product and the ambient temperature:
•
Winter - Setting
4
-
5
(5°C-10°C)
•
Spring and Autumn - Setting 2-4 (10°C-15°C)
•
Summer - Setting
1
-
2
(15°C-25°C)
The inner temperature varies in different parts of the
cooler. The back of the COOLCUBE is coldest.
WARNING
If temperature selector is set to too low a setting,
drinks become frozen. In extreme circumstances,
glass bottles may even break. Always exercise
caution when setting the temperature.
•
Do not place heavy items (more than 20 kg) on top
of the COOLCUBE.
•
Do not place any items on top of the COOLCUBE
which may fall off when the door is opened.
•
After the appliance has been unplugged, leave for
three minutes before plugging it in again.
When not in use
If the unit is not being used for long periods:
•
Unplug your COOLCUBE.
•
Clean and dry the inside of the appliance. Leave
the door slightly open to allow it to dry completely.
•
A cooler which is unused without being cleaned
may start to smell musty or develop mildew.
DEFROSTING AND CLEANING
Defrosting
•
The surface of the evaporator ices up when the
refrigerator is working. This is an entirely normal
part of operation. If the frost layer is more than
3mm thick, the cooler must be defrosted and
cleaned
to
avoid
unnecessary
energy
consumption and inefficient operation.
1.
Remove all items inside and unplug the unit.
2.
After defrosting, reset the temperature selector to
original position.
Cleaning
1.
Unplug your COOLCUBE.
2.
Wash the interior with warm water and neutral
detergent.
3.
Dry all surfaces thoroughly.
Note
: Do not use abrasive cleaners!
To ensure efficient operation the back and bottom of the
cooler should be cleaned thoroughly. Use mild soapy
water to clean the door seal.
Moving your Cool Cube
•
Unplug the appliance
•
Remove all items inside
Note
：
Never hold the appliance by the door.
Power Failure COOlCUBE
•
If a power cut occurs, do not open the door more
often than necessary in order to conserve cold air.
TROUBLESHOOTING
Before returning your COOLCUBE to the store, check
the following points; you may be able to solve any
problem yourself.
Problem
Solution
Not Cooling
•
Check power cable is
connected and fuse is
intact.
•
Wrong
temperature
selected.
Adjust
setting on controller to
