Scandium SC900WRS Installation Operation & Maintenance Download Page 6

Page 6

mild detergent. Do not scrub. 

NOTE:

 some discolouration of the frame may occur when washing in the 

dishwasher. 

CAUTION: 

Never use abrasive or oil based liquid cleaners.

•  If the grease filters are very dirty, the motor will extract only a small quantity of air, which reduces its 

efficiency. The grease deposits that build up on the filter are highly flammable and COULD EASILY CATCH 
FIRE. The manufacturer is not responsible in the event of fire due to poor maintenance of the grease filters.

• 

IMPORTANT:

 Never attempt to repair this appliance by yourself. Always refer to a qualified Service 

Technician. Remember to always switch off the electricity and unplug the connection before conducting 
maintenance or cleaning.

Light Bulb Replacement

•  Switch off the power to the rangehood and allow the bulb to cool.

•  Remove the bulb by turning it by hand in an anti clockwise direction.

•  Take care to avoid the bulb falling onto the hob top.

•  Replace the bulb by inserting it into the socket and hand turning in a clockwise direction.

Electrical Cord

Ensure the electric cord is not exposed to heat, chemicals or sharp objects. If the supply cord is damaged, it 
must be replaced by the manufacturer, service agent or a similarly qualified person in order to avoid a hazard.

For Users

•  This product is designed for domestic use only and should not be used outside or for commercial 

applications. 

•  After use, always ensure that all controls are in the “OFF” position. When frying with a gas flame, take 

particular care not to allow the oil or grease in the pan to catch fire. (Flambé)

•  Do not leave the frying pan or fryer unattended, as the oil could overheat and catch fire.

•  Never flambé any foods beneath the rangehood. The flames could cause a fire.

•  Before carrying out any operation inside the rangehood, unplug the appliance from the electrical mains.

•  Adhere to the cleaning frequencies and intervals for changing the filters, as otherwise the accumulated 

grease could cause a fire or damage the product.

•  Any alterations made to the rangehood will void the warranty.

3. Maintenance and Service

499

280223

462

14

6

50

27

283

20

41

Max

425

Min3

05

600

78.5

17

4

B

A

D

C

Ø4

A,B,C,D =

520

500

19

10

10

2 10

462±2

305

283

223±

2

248

50

Ø1

30

±2

28

80

B

C

D

A

A

B

C

D

1

2

1

2

3

4

5

5

Summary of Contents for SC900WRS

















Reviews: