7
GB
Changing the hinge side
The doors can be changed from right-hinged to left-hinged or vice versa in the following way:
1. Lay the cabinet on its back with door(s)
uppermost
2. Remove the upper hinge
3. Move the plastic plugs where the upper
hinge was fi tted
5. Remove the door-closer. Refi t the door-
closer on the opposite side.
6. Remove the kick plate panel
10. Fit the upper door
11. Keep the door-closer to the left.
12. Fit the upper hinge
7. Remove the screws holding the lower
hinge in place. Turn the pin which the
door was mounted so that it points
in th opposite direction. Rotate the
hinge 180º and refi t on the opposite
side of the cabinet.
13. Remove the door handles and refi t
them on the opposite side.
Refi t the cabs.
14. The cabinet must be allowed to stablise
in an upright position for 1.5 hours
before being switched on.
4. Lift off the upper door
8. Refi t the kick plate.
9. Adjust the hinge and tighten.