20
•
Always stand in the proscribed position when
operating.
•
Keep all body parts clear of the lifting
mechanism and never stand under the fork
and load.
•
Never use for personnel transport.
•
Never use for moving unstable or loose loads.
Take particular care when handling long, high
or wide loads to avoid them falling, hitting
other people or tipping the truck over.
•
Do not overload. Lifting capacity is stated on
type plate. The truck will not function
properly if overloaded.
•
Lifting capacity will depend on load being
evenly distributed and centre of gravity being
in middle of fork.
•
Check that fork length corresponds to pallet
length
•
Always lower the fork completely when not in
use.
•
Mechanical pallet trucks are intended for use
on smooth, hard surfaces. If the truck is to be
used on inclines, a handbrake can be ordered
as an optional extra. the truck can be stopped
in an emergency by lowering the load onto the
ground.
If the truck is stopped in this way, avoid
getting any bodily parts caught under the
load.
•
NEVER use on inclines with a load which is
too heavy for the user to handle. The truck is
mechanical, and must therefore not be used by
anyone physically incapable of handling it
when loaded.
•
Do not use release handle suddenly. This can
damage the lift and items on the fork.
•
Do not pump handle too quickly when
elevating. This can damage the hydraulic
system.
ENGLISH
INSTRUCTION MANUAL
•
Never put too much weight on the fork, and
place carefully. Do not leave in elevated
position for long periods.
•
Lifting capacity will be reduced if items are
not placed in the middle of the fork.
Assembly and adjustment
See exploded drawings at back of manual.
Fitting handle
•
Remove the three bolts (D611) from the
bracket (D151).
•
Mount handle (1) (D610B) on bracket, pass
chain (D612) and adjustment bolt (D614)
through hole in centre of bracket and axle pin
(D153).
•
Secure bracket using the three bolts.
•
Lift handle lever (D132), and insert
adjustment bolt in front hole. Adjustment nut
(D615) goes under the handle lever.
Adjustment
•
Check lift functions correctly when elevated
(release (2) in lower position), when moving
(release in centre position) and lowering
(release in upper position).
•
If the fork (4) elevates when handle is moved
and release is in centre position, turn
adjustment nut clockwise.
Summary of Contents for 75600
