16
Instruction of the child safety feature
This machine incorporates a special child safety lock, which can
prevent children from carelessly pressing keys or making the
faulty operation.
- When the dryer is at the operation state, press the
“Anti-
Crease” and “Gentle” buttons at the same time for over 3
seconds to start child lock function. When child lock function
is set, the display will light
“Child Lock” icon and no key
can effect to the dryer.
Under the start state of the child lock button, the
“Anti-
Crease” and “Gentle” buttons shall be pressed at the same
time for over 3 seconds to release the child lock function.
Instruction of the “Anti-Crease” function
When the
“anti-crease” function is selected, the LED of anti-
crease shall illuminate, and the drum will intermittent rotate dur-
ing the drying programme, in older to give more care to ensure
the sensitive textiles can not get crease.
Instruction of the “Gentle” function
When the
“Gentle” function is selected, the LED of Gentle shall
illuminate, and the programme will give less heat to protect sen-
sitive textiles from high temperature which may harm to these
textiles, such as acetate, elastane and etc.
Instruction of the drum light
For your convenience, this function can help you to see clearly
when you open the machine door.
Instruction of the Auto Anti-crease function
To avoid the clothes creasing after the programme finished, the
dryer will automatically intermittent rotate about 2 hours.
Cleaning and routine maintenance
Clean the lint filter
Leave the dryer to cool down.
1 Open the machine door.
2 Take out the lint filter, pull upward to take it out.
3 Clean the lint filter; wipe off the scrap threads accumulated
on the lint filter.
4 Reinstall the lint filter.
- The lint filter accumulated on the filter will block the air
circulation, which will cause the extension of drying time
and energy use; therefore, the scrap thread filter shall be
cleaned after each use.
- Do disconnect the power cord before cleaning!
- Do not operate the dryer without the lint filter!
- Clean the lint filter after each use to prevent lint accumula-
tion inside the dryer.
Wash air condenser
Leave the dryer to cool down.
Residual water may escape,place an ab-
sorbent cloth under the maintenance flap.
1 Unlock the maintenance flap.
2 Completely open maintenace flap.
3 Screw both locking levers towardas
each other.
4 Pool out the air conderser.
Do not damage the air conderser!
5 Clean with warm water only;do not
use hard/sharp-edged objects!
6 Clean the air conderser completely,
drain thoroughly.
7 Clean the seals.
8 Re-insert the air conderser, handle at
the button!
9 Unscrew both locking levers.
Cloth the maintenance flap until it locks
into position.
Do not operate the dryer without the air
condenser!
Please clean the air condenser if frequently used.
During drying, water may collect between the window and the
seal, but this does not affect the function of your dryer!
Specification
Technical specification & Product fiche
Overall Size . . . . . . . . . . . . . . . . . . . . . . . . . . 595×565×845(mm)
Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43kg
Rated Drying Capacity. . . . . . . . . . . . . . . . . . . 7.0kg(Dry Clothes)
Rated Frenquency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Hz
Power supply voltage . . . . . . . . . . . . . . . . . . . . . . . . 220-240V~
Rated input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2700W
Precautions
Repairs may be carried out by customer service of authorised
technicians only!
Before you call customer service, please check whether you can
correct the fault yourself.
A technician will charge you for advice, even during the warranty
period.
