SCAN 5004 FL, Assembly And Instruction Manual

Page: 32 / 44

A ( 1 : 2 )
A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR: EMNE:
C:\Working Folder\Designs\Scan 5004\95004013.idw
95004013
Spjældregulering, Scan 5004 FR
06-09-2017
sr
Scan 5004
VÆGT:
AREAL:
N/A
N/A
A ( 1 : 2 )
A
NAVN:
STI:
DIMENSION:
MATERIALE:
DATO:
SIGN:
Krog Iversen & Co A/S
DK-5492 Vissenbjerg©
TG.NR: EMNE:
C:\Working Folder\Designs\Scan 5004\95004013.idw
95004013
Spjældregulering, Scan 5004 FR
06-09-2017
sr
Scan 5004
VÆGT:
AREAL:
N/A
N/A
32
Open Closed
INSTRUCTIONS FOR USE
BAFFLE PLATES
The baffle plates are located in the upper part of the combustion chamber. The plates holds back smoke, making sure it stays
inside the combustion chamber for a longer time before escaping through the chimney. This reduces the flue gas temperature as
the gases have more time to dissipate heat to the stove.
The baffle plates must be removed for sweeping; see “Maintenance”. Note that the baffle plates are made of porous, ceramic
material, and are liable to break easily. You should therefore handle them with care.
The baffle plates are subject to wear and tear and not coverec by the warranty.
COMBUSTION AIR
Combustion air is pre-heated and fed indirectly to the fire. The combustion air flow determines the heat output from your built-in
stove. At the same time, the air flow cleans the glass pane to prevent buid-up of soot. If there is a soot formation on the glass, this
is often due to the fact that the combustion air is turned too much down.
When lighting the fire, the combustion air should be fully open.