Ceramic smoke deflectors
Lift up the lower ceramic smoke deflector, pull
out the pins in the lateral combustion chamber
plates and remove the deflector. The upper
deflector is removed in the same way.
You have chosen a product from one of Europe's leading manufacturers of wood-burning stoves. We
are convinced that your stove will be to your full satisfaction and give you many hours of pleasure if
you follow the advice and instructions of this manual.
Please read this manual as well as the
General Instructions for Installation
before beginning the
installation.
Congratulations on your new SCAN stove!
SCA
N
1
4
5
2
1
Production number.
Please always indicate the pro-
duction number in case you need to contact us.
2
Ashtray.
When you open the door, you have access
to the ashtray, which is placed below the combustion
chamber.
Attention! Be careful when you empty ashes
from the stove. There may be embers left for up to 24
hours after the stove was last used!
3
Lid for ashtray.
Under the ashtray you will find a lid to
put on top of the ashtray when you carry it out for emp-
tying.
Handle for shaking grate.
The stove is equipped with
a shaking grate. When you activate the grate handle,
the ashes from the combustion chamber are emptied
into the ashtray.
5
Regulation for primary air.
Turn the air valve in order
to open. The primary air is used when lighting and
refuelling the stove. It should always be closed during
continuous firing.
3
Adjustment screws
The stove has two adjustment screws on the bottom
that can be used for levelling the stove.
SCAN 37-2
The ash tray, shaking grate, and primary air should
always be closed during continuous firing.
4
Clean combustion
The SCAN 37-2 uses the "CB technique"
(Clean-Burn) to ensure an optimally clean
combustion. The extra combustion air is pre-
heated and led into the combustion chamber
close to the ceramic smoke deflector.
Adjustment of the air
Wood / briquettes
Fuel kg/h (beechwood
max. 20% humidity)
SCAN 37-2
2 kg
Combustion air %
100
Primary air %
0
