manualshive.com logo in svg

Scan View SCANMATE F10, User Manual

Share
Download
Scan View SCANMATE F10 User Manual Download Page 9

Technical specifications

Originals

Transmission and reflection originals in positive or negative, color, gray
scale or line art, with or without existing screen.

Scanning technology

CCD flatbed with zoom lens and “XYZ” technology.

Scanning area

Transparencies: 

305 x 420 mm (12"  x 16.5").

Reflectives: 

305 x 432 mm (12" x 17").

Dot copying:

305 x 440 mm (12" x 17.3") incl. a 4-mm border for 
registration marks.

Maximum original size

Transparencies: 

305 x 420 mm (12"  x 16.5").

Reflectives: 

320 x 455 mm (12.6" x 17.9").

Dot copying:

320 x 455 mm (12.6" x 17.9")

Speed

Single-pass scanning.
Up to 600,000 pixels per second.
High-speed mode for line art.

Scan resolution

Optical:

up to 5400 dpi.

Interpolated:

up to 13,000 dpi.

Maximum optical resolution for entire scanning area: 2500 dpi.
Oversampling possible via software.

Optical density

Range: 3.7, max: 4.0.

Sensor unit

Trilinear CCD element, 10,200 pixels wide.

SPECIFICATIONS

ScanMate F10 • Operator’s Manual

1•1

Summary of Contents for SCANMATE F10



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands