manualshive.com logo in svg

Scan View SCANMATE F10, User Manual

Share
Download
Scan View SCANMATE F10 User Manual Download Page 30

Standard templates 

Whenever possible, we recommend using templates for mounting transmis-
sion originals. Besides making batch scanning more efficient and ensuring
proper alignment of all originals, using the templates minimizes the use of
tape directly on the  mounting plate, prolonging the life of the plate.

A set of several different templates is supplied with the scanner. Additional

templates in any of the formats are available from your ScanView dealer.

MOUNTING ORIGINALS IN A TEMPLATE

• Choose the template that matches the size of your originals and ensure that

the top surface is clean so that the tape can adhere properly.

• If the number of originals to be mounted is less than the number of

cut-outs in the template, mount the originals in the number sequence
marked on the template. Note that the highest scan resolution is obtained
in the center part of the scanner bed. 

• Place the originals with the emulsion side down and the top edge towards

the coded end of the template. 

• Using a good quality lithographic tape, tape the original to the template on

two sides.

Handling originals and mounting plates

5•4

ScanMate F10 • Operator’s Manual

24 x 36  mm 

6 x 6 cm

4" x 5"

35-mm strips, vertical 

35-mm strips, horizontal

6 x 7 cm

Reflection

A set of seven templates for
various common original formats is
supplied with the scanner.
Additional templates are available
from your ScanView dealer.

Summary of Contents for SCANMATE F10



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands