Scan-Electronics RadiaCode-101, User Manual, Page: 23 / 36

Standalone usage 21
© 2021 Scan Electronics Ltd.
To return to the top level or quit the menu, set
focus on the
[<Back] or [<< Menu quit] item
respectively and confirm your choice by short
pressing the round button.
3.8.2 Measurement units
Use [Measurement units] item of Settings submenu to change the units of Monitor , Dose and Search
display modes:
·
while in the Settings , set focus on the [Measurement units] by short
pressing the " up " and " down " swing buttons;
·
enter the submenu by short pressing the round button.
If you need to change the units of Monitor / dose rate and Dose display modes take the following steps
(while in the [Measurement units] ):
·
set focus on the [Dose] item by short pressing
the swing buttons;
·
select the dose (and dose rate) units by short
pressing the round button: Sv {Sievert} ( Sv/h
for Monitor mode) or R {Roentgen} ( R/h for
Monitor mode).
If you need to change the units of Monitor / count rate and Search display modes take the following
steps (while in the [Measurement units] ):
·
set focus on the [Count rate] item by short
pressing the swing buttons;
·
select the count rate units by short pressing
the round button: CPS {counts per second} or
CPM {counts per minute}.
To return to the Settings or quit the menu select [<Back] or [<< Menu quit] item respectively and
confirm your choice by short pressing the round button.