Scan-Electronics RadiaCode-101, User Manual, Page: 27 / 36

Standalone usage 25
© 2021 Scan Electronics Ltd.
·
set focus on the [Duration] item by short
pressing the swing buttons;
·
select the backlight duration by short pressing
the round button, there are 4 variants: [5 s] , [10
s] (default), [15 s] , [30 s] .
§
To change the backlight brightness level (while in the [Backlight] ):
·
set focus on the [Brightness] item by short
pressing the swing buttons;
·
select the backlight duration by short pressing
the round button, there are 10 variants: from [0]
to [9] , default level is [5] .
To return to the higher level or quit the menu set focus on the [<Back] or [<< Menu quit] item
respectively and confirm your choice by short pressing the round button.
If you need to change the mode of display orientation, take the following steps (while in the [Screen] ).
·
set focus on the [Rotate] item by short
pressing the swing buttons;
·
select the display orientation mode by short
pressing the round button, there are 3 variants:
[Auto] (default), [Left] , [Right] .
To return to the Settings or quit the menu, set focus on the [<Back] or [<< Menu quit] item respectively
and confirm your choice by short pressing the round button.
3.8.6 Signals
You can define the operating mode of sound, light and vibration signaling via the menu. Separate sound
and vibration permissions are available for buttons and alarms.
Use [Signals] item of Settings to define the operating mode of signalization:
·
while in the Settings , set focus on the [Signals] item by short pressing
the " up " and " down " swing buttons;
·
enter the submenu by short pressing the round button.
If you need to change the global sound permission, take the following steps (while in the [Signals] ):