Introduction
8
SC 1500 - Doc. No. 018522-000/03-025
GB
Dimension detection (in mm)
Detects notes/documents of differing width (short side) in
any bundle.
If an under-sized or over-sized note/documents is detected,
the machine stops at once with a beep tone and ”dd”
appears on the display.
The top most note/document on the stacker table is the
different one and is not included in the counted total.
The minimum detectable difference (detecting accuracy) is
2 mm and can also be changed up to 7 mm (see
“Setting
dimension detection accuracy (DD-function, short side)”
on page 12
). The factory setting is 4 mm.
Manual start
(SC 1500 std only).
This function can be used together with other functions.
When the
MN
-function is enabled, the machine does not
start automatically when notes are placed on the feed
table.
UV detection
(UV-versions only)
Checks notes/documents by means of ultraviolet light.
Can be used for almost any notes. The purpose is to
identify the paper quality. It is used to detect suspicious
notes/documents.
When a suspicious note/document is detected, the
machine stops at once with a beep tone and “CF1”
appears on the display.
Description
MN
UV
