Scale Installation
7600414 REVA
Page 5
Refer to Fig. 2
i.
Unbolt the swivel retaining collar and remove the collar from the swivel shaft.
ii.
Remove the swivel shaft.
iii.
Unbolt and remove the pintle receiver from the vertical adjustment hitch.
IMPORTANT!! For Digi-Star load cells arrow sticker must be pointed up. For Weigh-Tronix weigh Bars “TOP”
sticker must be positioned to the top.
3. Repeat steps one through two for installation of the other side.
4. Remove existing hitch and Install hitch load cell.
Fig. 2
