e
Nod3-
C
Digital Transmitter
e
Nod3-
C
:
User’s instructions
NU-eNod3C-E-0911_165702-I
13/22
6 INPUTS
FUNCTIONING:
Each input can function in positive or negative logic individually. A debounce time common to both
inputs can be adjusted.
6.1 Assignment
of
inputs:
Function
Operating mode
Transmitter
Checkweigher
Peak
control
none
●
●
●
tare
●
●
●
zero
●
●
●
transmit
measurement
●
measurement
window
●
●
clear
●
●
●
start cycle
●
●
New cycle
allowance
●
stop checkweigher
cycle
●
dynamic zero
●
6.2 General
functions:
-
none
: inputs are inoperative.
-
tare
: one or the other or both inputs may be assigned to the tare function.
The tare is affected by a stability criterion that can be parameter defined. The tare will be
triggered on a rising or a falling edge, depending on the parameter defined logic (positive or
negative).
-
zero
: one or the other or both inputs may be assigned to the zero function.
A new zero is only accepted if its value is within a ±10% range of the specified maximum
capacity for a usage out of legal for trade and ±2% for legal for trade application. This zero
value is the current zero value, and is cancelled following a reset. Stability and starting on a
rising or falling edge (same as for tare control).
6.3 Functions attached to an operating mode:
See corresponding sections.
