40
R
Section 7
WASHER
HEX HEAD BOLT
CUTTER
BLADE
SPINDLE
ASSEMBLY
CUTTER BLADE
SPACER
HEX HEAD
BOLT / NUT
CUTTER
DECK
SPINDLE
SHAFT
HEX NUT-TORQUE
TO 75 LB-FT
Figure 7-8. Blade Replacement
7.10 TIRES
Check the tire pressures after every 8 hours of operation
or daily.
Caster
Wheels
Flat-Free
Drive
Wheels
12
PSI
7.11 BODY AND DECK
CAUTION
Do not wash any portion of the equipment while it
is hot. Do not wash the engine; use compressed
air.
1. After each use, wash the mower and cutter deck.
Use cold water and automotive cleaners. Do not use
pressure cleaners.
2. Do not spray electrical components.
3. Repair damaged metal surfaces using Scag touch-
up paint (P/N 48521 -Aerosol Can & 484540-01
- 0.6fl.oz. Bottle with brush) available from your
authorized Scag dealer. Wax the mower with an
automotive paint wax for maximum paint protection.