![background image](http://html1.mh-extra.com/html/scag-power-equipment/swz36a-14fs/swz36a-14fs_operators-manual_1205932031.webp)
27
R
Section 7
MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS (CONT'D)
HOURS
PROCEDURE
COMMENTS
BREAK-IN
(FIRST 10)
8
40
100
200
500
X
Check hardware for tightness
X
Change engine oil filter
See paragraph 7.4
X
Replace engine fuel filter
See paragraph 7.5
X
Grease caster wheel pivot
shafts
See paragraph 7.2
X
Drain hydraulic system and
replace oil and filter
See paragraph 7.3
X
Adjust electric PTO clutch
See paragraph 6.6
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions
7.2 LUBRICATION
GREASE FITTING LUBRICATION CHART
LOCATION
LUBRICATION INTERVAL
LUBRICANT
NO. OF
PLACES
1 - Caster Wheel Pivot
100 Hours / Bi-Weekly
Chassis Grease
2
2 - Caster Wheel Bearings
100 Hours / Monthly
Chassis Grease
2
3 - Brake Actuator Levers
100 Hours / Bi-Weekly
Chassis Grease
2
4 - Cutter Deck Spindles
40 Hours / Weekly
Spindle Grease
2 / 3
5 - Pump Control Pivot
100 Hours / Monthly
Chassis Grease
2
6 - Brake Lever
100 Hours / Bi-Weekly
Chassis Grease
1
7 - Neutral Cam Pivot
200 Hours / Monthly
Chassis Grease
2
+ Compatible Greases:
Scag Premium Chassis Grease p/n 486257
Scag Premium Spindle Grease p/n 486258