background image

*  Keep all shields in place, especially the grass discharge chute.
*  Before performing any maintenance or service, stop the machine and
   remove the spark plug wire and ignition key.
*  If a mechanism becomes clogged, stop the engine before cleaning.
*  Keep hands, feet and clothing away from power-driven parts.
*  Read this manual completely as well as other manuals that came
   with your mower.
*  Keep others off the tractor (only one person at a time)

FAILURE TO FOLLOW SAFE OPERATING PRACTICES

 MAY RESULT IN SERIOUS INJURY.

WARNING:

This manual covers the operating instructions

 and illustrated parts list for:

SWZ36A-15KA  with a serial number of  A1400001 to A1499999
SWZ48A-17KA  with a serial number of  A1600001 to A1699999
SWZ48A-17KAE with a serial number of  A1700001 to A1799999
SWZ48A-18HN  with a serial number of  A1800001 to A1899999
SWZ52A-17KA  with a serial number of  A1900001 to A1999999
SWZ52A-18HN  with a serial number of  A2000001 to A2099999
SWZ52A-18KH  with a serial number of  A2100001 to A2199999
SWZ52A-19KAI  with a serial number of  A2200001 to A2299999
SWZ-17KA

 with a serial number of  A3100001 to A3199999

SWZ-19KAI

 with a serial number of  A3200001 to A3299999

SWZ-21KAE

 with a serial number of  A3300001 to A3399999

SWM-52A

 with a serial number of  A3400001 to A3499999

SWM-61A

 with a serial number of  A3500001 to A3599999

Always use the entire serial number listed on the serial number
tag when referring to this product.

REMEMBER - YOUR MOWER IS ONLY AS SAFE AS THE OPERATOR!

Hazard control and accident prevention are dependent upon the awareness,
concern, prudence, and proper training of the personnel involved in the
operation, transport, maintenance, and storage of the equipment.

Summary of Contents for SWZ





















Reviews: