15
COMMENTS
PROCEDURE
LUBRICATION & MAINTENANCE
+ Grease spindle until grease comes out the relief valve
Compatible Greases:
Lidok EP #2 (found at industrial shops)
Ronex MP (Exxon service stations)
Shell Alvania (Shell service stations)
Mobilux #2 (Mobil service stations)
Super Lub M EP #2 (Conoco service stations)
X
X
BREAK-IN
8 HOURS (DAILY)
40 HOURS (WEEKLY)
100 HOURS (BIWEEKLY)
500 HRS OR ANNUALLY
Check all hardware for proper tightness
Change engine oil and filter at 5 hours
X
Check engine oil
Do not over fill
X
Remove debris from under belt cover
More often if needed
X
Sharpen cutter blades
More often if needed
X
Grease spindle bearings
+ US Lithium MP White Grease 2125
X
Clean air filter
More often if needed
X
Check belt tension
Adjust as needed
X
Check tire pressure
Add or adjust as required
X
Check battery level
Adjust as needed
X
Replace air filter
More often if needed
X
Grease caster wheel bearings
Chassis grease
X
Grease caster wheel pivot shafts
Chassis grease
X
Grease idler pulley bracket on cutter deck
Chassis grease
X
Change hydrostatic oil filter
Clean area before removing the filter
X
Change engine oil and filter
See engine manufacturer information
X
Grease idler arm pivots
Chassis grease
X
Grease brake hand lever
Chassis grease
X
Grease brake actuator levers
Chassis grease
X
Check all hardware for proper tightness
X
Adjust air gap on electric clutch
Contact your Scag dealer for information about
X
Drain hydraulic system and replace oil
making this adjustment.
