![background image](http://html1.mh-extra.com/html/scag-power-equipment/stt/stt_operators-manual_1205879071.webp)
67
Section 8
1
482285
Decal, Danger-Spining Blades
2
482286
Decal, Warning-Rotating Blades
3
481954
Decal, 52 Advantage
481955
Decal, 61 Advantage
481956
Decal, 72 Advantage
4
482290
Decal, Fuel Tank
5
48656
Decal, Patents
6
481568
Decal, Traction Control
7
48072
Decal, Heavy Duty Commercial
8
48404
Decal, MetalCraft-Made In USA
9
481039
Decal, Belt Cover
10
482311
Decal, Instrument Panel-Upper
11
481669
Decal, Instrument Panel-Upper (Kawasaki)
12
481348
Decal, Instrument Panel-Lower
13
481543
Decal, Cutting Height
14
482287
Decal, Start/Drive Procedure
15
481588
Decal, Seat Support
16
481569
Decal, Turf Tiger
17
481570
Decal, Turf Tiger
18
481664
Decal, Stripes-RH
19
481663
Decal, Stripes-LH
20
481694
Decal, Tiger
Ref. Part
No.
No.
Description
REPLACEMENT DECALS AND INFORMATION PLATES
IMPORTANT ADJUSTMENT
PROCEDURES
READ OPERATOR'S MANUAL
FOR MORE DETAILS
NEUTRAL ADJUSTMENT
TRACKING ADJUSTMENT
FREE WHEEL OPERATION
HYDRAULIC TANK FLUID LEVEL
Check tire pressure-
(Drive tires - 12 psi,
Caster tires - 25 psi)
To move machine without running
the engine, rotate both dump valve
levers located at the LH side of
the pumps CCW 1/2 turn to
"freewheel" positions. Return
levers to original position to
operate the mower.
If the machine pulls to the right,
adjust LH control linkage CCW to
slow left wheel. If the machine
pulls to the left, adjust RH control
linkage CCW to slow right wheel.
Readjust neutral if necessary.
With an operator in the seat,
engine running, control levers
in neutral and the parking brake
disengaged - adjust control
linkage. Loosen jam nuts. If wheel
rotates forward, adjust turnbuckle
CCW. If wheel rotates rearward,
adjust turnbuckle CW. Adjust until
drive wheel stops turning. Tighten
jam nuts. Repeat for opposite side.
Check hydraulic fluid level
daily while fluid is cool.
Fluid level should be 3-1/4"
below top of filler neck.
Fill with SAE 20W50 motor oil only.
IMPORTANT!:
Do not overfill. Room for hot
fluid expansion must be allowed
or resulting expansion may cause
leaks in the system.
Gearbox lubricant:
SAE 80W90 gear oil
481588
Loosen jam nuts
Rotate turnbuckle
481569
481570
R
16
390S0173
17
19
18
15
481663
481664
R
20
Summary of Contents for STT
Page 75: ...71 Section 8 NOTES...