26
R
Section 7
MAINTENANCE CHART - RECOMMENDED SERvICE INTERvALS (CONT'D)
HOURS
PROCEDURE
COMMENTS
BREAk-IN
(FIRST 10)
8
40
100
200
500
X
Apply grease to fittings
See paragraph 7.2
X
Check hardware for tightness
X
Change engine oil filter
See paragraph 7.4
X
Check hydraulic oil level
See paragraph 7.3
X
Replace engine fuel filter
See paragraph 7.5
X
Drain hydraulic system and
replace hydraulic oil
Use SAE 10W30 Motor Oil.
See paragraph 7.3
X
Replace hydraulic oil filter
See paragraph 7.3
LUBRICATION
7.2
GREASE FITTING LUBRICATION CHART
LOCATION
LUBRICATION INTERvAL
LUBRICANT
NO. OF
PLACES
Cutter Deck Spindle
40 Hours/Weekly
Lithium MP White Grease 2125
3
Caster Wheel Bearings
100 Hours/Monthly
Chassis Grease
2
Idler Arm Pivots
100 Hours/Bi-Weekly
Chassis Grease
4
Rider Frame Pivot
200 Hours/Monthly
Chassis Grease
2
Control Bell Cranks
200 Hours/Monthly
Chassis Grease
2
Steering Handle Bearing
200 Hours/Monthly
Chassis Grease
1
Grease foot pedal bearings
200 Hours/Monthly
Chassis Grease
2
Rear Wheel Pivot (vertical)
200 Hours/Monthly
Chassis Grease
1
Rear Wheel Bearing
200 Hours/Monthly
Lithium MP White Grease 2125
1
+ Compatible Greases:
Mobilix #2 found at Mobil Service Stations
Ronex MP found at Exxon Service Stations
Super Lube MEP #2 & Super Stay-M #2 found at Conoco Stations
Shell Alvania #2 found at Shell Service Stations
Lidok EP #2 found at industrial shops
* Remove plug and insert grease zerk. Before filling with grease, remove dust cap from the top of the pivot.
