1
INTRODUCTION
This manual has been prepared to provide the
information you need to correctly assemble,
operate and maintain this attachment. Read it
carefully and keep it for future reference. Should
you ever need repair parts or service, contact your
authorized Scag Service Dealer.
Any reference made in this manual concerning the
RH or LH sides are determined with the operator
in the normal operating position.
The replacement of any part on this product by
other than the manufacturer's authorized
replacement part may adversely affect the
performance, durability or safety of this product.
SAFETY AND OPERATING
INSTRUCTIONS
To avoid personal injury, it is imperative that all
safety instructions be observed.
Your sulky was built to the highest standards in the
industry. However, the use of a riding sulky, when
attached to a walk behind mower, is only as safe
as the operator. Carelessness or error on the part
of the operator may result in serious bodily injury.
Please read and follow these instructions on safe
operation, and be certain anyone using this sulky is
familiar with these rules.
1. Read this technical manual and the technical
manual that is supplied with the machine this
attachment is used on. A replacement manual
is available by sending complete model and
serial number to:
Scag Power Equipment
1000 Metalcraft Dr.
P.O. Box 152
Mayville, WI 53050
2. Do not operate this sulky on steep slopes.
3. Do not run over rocks, holes or other
obstructions that may make the sulky
unstable.
4. Always keep both hands on the steering
controls when using the mower with the sulky
attached.
5. When operating the mower in reverse, make
certain that there are no obstructions behind
you.
6. Have a first time operator practice driving the
mower and sulky in an open, level area before
operating under actual mowing conditions.
7. Before leaving the sulky seat:
l
Disengage blade clutch
l
Engage both neutral locks
l
Pull speed control lever to neutral
l
Apply the parking brake
l
Wait for all movement to stop
