background image

1

1.1 INTRODUCTION

This manual has been prepared to provide the
information you need to correctly assemble, operate,
and maintain this Tiger Striper. Read it carefully and
keep it for future reference.

The replacement of any part on this product by other
than the manufacturer's authorized replacement part
may adversely affect the performance, durability or
safety of this product.

USE OF OTHER THAN ORIGINAL SCAG
REPLACEMENT PARTS WILL VOID THE
WARRANTY.

If additional information or service is needed that is
not outlined in this manual, please contact your Scag
Power Equipment dealer.  Scag dealers are trained in
the latest service methods and carry a full line of Scag
replacement parts.

When ordering parts, always provide the complete
model of this Tiger Striper.

All information provided in this manual is based upon
information available at the time of printing.  Scag
Power Equipment reserves the right to make changes
at any time without notice or obligation.

2.1 SAFETY INFORMATION

-NOTE-

To avoid personal injury, it is imperative that all
safety instructions be observed.

1. Read this operator's manual and the

operator's manual that is supplied with the
machine this attachment is used on.

A replacement manual is available from your
authorized Scag Service Dealer or by contacting:
Scag Power Equipment, Service Department at P.O.
Box 152, Mayville, WI 53050.  You may also contact
us through our website at www.scag.com. Please
indicate the complete model number of your Scag
product when ordering a replacement manual.

2. Before removing the Tiger Striper, disengage the

mower, stop the engine and wait for all
movement to stop.

3. ALWAYS turn the engine OFF, remove the key

and wait for all movement to stop before
servicing, cleaning or removing the Tiger Striper.

4. Do not modify or alter any component of the

Tiger Striper attachment or mower.

5. Do not allow any passengers to ride on the

mower.

2.2  OPERATING INSTRUCTIONS

To operate the Tiger Striper, you will need to lower
the roller to the operating position. The Tiger Striper
can be easily removed or locked in the transport
position whenever the machine is being transported
or when striping is not needed.

1. To unlock the Tiger Striper from the transport

position, lift up slightly on the handle and turn the
lock pin until the small roll pin lines up with the
slot. See Figure 2-1 on page 2.

1.2 DIRECTION REFERENCE

The "Right" and "Left", "Front" and "Rear" of the
machine are referenced from the normal operating
position.

Summary of Contents for MODEL TS















Reviews: