Scag Power Equipment Liberty Z SZL36-18FR, Operator'S Manual

Page: 32 / 70

28
R
Section 7
7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS
HOURS
PROCEDURE COMMENTS
BREAK-IN
(FIRST 10)
8 20 40 50 100 150 200 400
X
Check all hardware for tightness
X
Check hydraulic oil level See paragraph 7.3
X
Check all belts for proper alignment See paragraph 7.8
X
Change engine oil See paragraph 7.4
X
Check hydraulic hoses for leaks U s e ex t r e m e c a u t i o n w h e n
checking the hydraulic hoses. See
paragraph 2.3
X
*Clean mower See paragraph 7.11
X
Check condition of blades See paragraph 7.9
X
Check tire pressure See paragraph 7.10
X
Check safety interlock system See paragraph 4.2
X
Check battery, clean battery posts
and cables See paragraph 7.7
X
Inspect pump drive belt. Replace
every 400 hours or 2 years, whichever
occurs first. See paragraph 6.4 & 7.8
X
Check belts for proper alignment See paragraph 7.8
X
Change engine oil - Perform after
every 50 hours of operation See paragraph 7.4
X
Check condition of fuel lines
X
Grease cutter deck bellcranks and
pusharms See paragraph 7.2
X
Change engine oil and filter - Perform
after every 100 hours of operation See paragraph 7.4
X
Drain hydraulic system, replace
hydraulic oil and filters U s e S A E 2 0 W 5 0 M o t o r O i l .
See paragraph 7.3
X
*Clean air cleaner element See paragraph 7.6
X Change engine oil - Perform after
every 50 hours of operation See paragraph 7.4
X Check all hardware for tightness
X Change engine oil and filter - Perform
after every 100 hours of operation See paragraph 7.4
X Check hydraulic oil level See paragraph 7.3
X Drain hydraulic system, replace
hydraulic oil and filters U s e S A E 2 0 W 5 0 M o t o r O i l .
See paragraph 7.3
X Replace pump drive belt See paragraph 7.8
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions
MAINTENANCE