1
R
Section 1
1.1 INTRODUCTION
This manual has been prepared to provide the
information you need to correctly assemble, operate, and
maintain this grass catcher. Read it carefully and keep it
for future reference.
THE REPLACEMENT OF ANY PART ON THIS PRODUCT
BY OTHER THAN THE MANUFACTURER'S AUTHORIZED
REPLACEMENT PART MAY ADVERSELY AFFECT THE
PERFORMANCE, DURABILITY OR SAFETY OF THIS
PRODUCT.
USE OF OTHER THAN ORIGINAL SCAG REPLACEMENT
PARTS WILL VOID THE WARRANTY.
If additional information or service is needed that is not
outlined in this manual, please contact your Scag Power
Equipment dealer. Scag dealers are trained in the latest
service methods and carry a full line of Scag replacement
parts.
When ordering parts, always provide the complete model
number and serial number of your catcher.
All information provided in this manual is based upon
information available at the time of printing. Scag Power
Equipment reserves the right to make changes at any time
without notice or obligation.
1.2 DIRECTION REFERENCE
The “Right” and “Left”, “Front” and “Rear” of the machine
are referenced from the operator’s right and left when
standing in the normal operating position and facing the
forward travel direction.
1.3 SAFETY AND OPERATING
INSTRUCTIONS
NOTE -
To avoid personal injury, it is imperative that all
safety instructions be observed.
1. Read this operator's manual and the operator's
manual that is supplied with the machine this
attachment is used on.
GENERAL INFORMATION
A replacement manual is available from your authorized
Scag Service Dealer or by contacting: Scag Power
Equipment, Service Department at P.O. Box 152, Mayville,
WI 53050. You may also contact us through our website at
www.scag.com The manual for this grass catcher can be
downloaded by using the model and serial number or use
the contact form to make your request. Please indicate the
complete model and serial number of your Scag product
when requesting replacement manuals.
WARNING
Do not operate without discharge chute, mulch
kit, operator controlled discharge chute (OCDC),
or entire grass catcher installed.
2. Before removing the grass bags, disengage the
mower, stop the engine and wait for all movement to
stop.
3. ALWAYS turn the engine OFF, remove the key and
wait for all movement to stop before servicing or
cleaning the mower or the grass catcher.
DANGER
ROTATING BLOWER
BLADES
STOP ENGINE BEFORE
ENTERING CHUTE
CONTACT CAN INJURE
4. Do not modify or alter any component of the grass
catcher attachment or mower.
5. Do not allow any passengers to ride on the grass
catcher attachment or on the mower.
