5
7. Install the blower assembly to the mounting
bracket and secure with the mounting pin and
hair pin. See Figure 3-4, Page 4.
8. Align the blower assembly with the discharge
opening of the cutter deck. Tighten the
hardware for the mounting bracket. Install the
quick pin through the rear hole in the discharge
chute mounting bracket. See Figure 3-4, Page 4.
9. Install the new belt cover from the cutter deck to
the blower mounting bracket and secure with the
original belt cover plastic wing nuts.
10. Install the belt to the spindle pulley. When
replacing the belt, see figure below.
FRONT SIDE
IDLER PULLEY
BACK SIDE
IDLER PULLEY
BLOWER
PULLEY
SPINDLE
PULLEY
11. Install the plastic belt cover and secure with the
plastic wing nuts. See Page 12 of the Illustrated
Parts List for proper installation.
12. Install the hopper mounting brackets (p/n 451512
& p/n 451595) to the outside of the frame on the
rear of the machine using 3/8-16 x 1" hex head
bolts (p/n 04001-19) and 3/8-16 elastic stop nuts
(p/n 04021-09). See Figure 3-6, Page 6 STT
models and Figure 3-7, Page 7 for all SCZ
models.
13. Install the catcher support bracket onto the rear
of the machine and secure with 5/16-18 x 1"
carriage bolts (p/n 04003-04) and 5/16-18
serrated flange nuts (p/n 04019-03). See Figure
3-5.
-NOTE-
The catcher support bracket for the SCZ61V
is included with the 9079 Installation Kit.
14. With the help of an assistant, install the hopper
assembly into the hopper mounting brackets.
See Figure 3-6, Page 6 STT models and Figure
3-7, Page 7 for all SCZ models.
15. Install the hose from the blower assembly to the
hopper assembly. Secure using the 8-1/2"
clamps.
-NOTE-
When installing this catcher on machines
equipped with an air cooled engine the
discharge hose should be shortened to
56" in length.
16. Install the Installation Kit as outlined in the
instruction sheet included with the Installation
Kit.
17. Operate and test.
FIGURE 3-5
C
a
tcher
Su
pport Br
a
cket
C
a
tcher
Su
pport Br
a
cket
Exi
s
ting
H
a
rdw
a
re
Exi
s
ting
H
a
rdw
a
re
STT61V / STT61V-28CAT
SCZ61V