![background image](http://html.mh-extra.com/html/scag-power-equipment/gc-sfz/gc-sfz_operators-manual_1205975006.webp)
4
R
Section 2
2. Tighten the hardware.
3. Install the right side cutter deck baffle supplied in the
grass catcher Installation Kit as shown in Figure 2-9.
Secure using (2) 3/8-16 x 1" carriage bolts, (2) 3/8"
flatwashers and (2) 3/8-16 elastic stop nuts.
3/8-16 x 1”
3/8-16 x 1”
3/8-16 ELASTIC
STOP NUT
3/8-16 ELASTIC
STOP NUT
3/8 FLATWASHER
3/8 FLATWASHER
Figure 2-9. Right Side Deck Baffle Installation
4. Tighten the hardware.
5. Install the deflector baffle included with the catcher
Installation Kit to the discharge boot and secure
using (2) 1/4-20 x 1" hex head bolts, (4) 1/4"
flatwashers and (2) 1/4-20 elastic stop nuts. See
Figure 2-10.
1/4-20 ELASTIC
STOP NUT
1/4” FLATWASHER
1/4” FLATWASHER
1/4-20 x 1”
Figure 2-10. Deflector Baffle Installation
6. Tighten the hardware.
7. Install the new cutter blades included with the
Installation Kit and secure using the hardware
removed in Section 2.1, Step 4. On the right side of
the cutter deck, install the cross cutter blade below
the high lift cutter blade as shown in Figure 2-11.
Use optional Blade Buddy tool P/N 9212 to assist in
securing the cutter blades.
-NOTE-
The cross blade is installed on the right side
only.
WARNING
Blades have a sharp edge. Wear proper eye
protection and protective gloves or wrap
blades with protective material when removing,
sharpening and installing.
5/8-11 x 1-1/2" BOLT
TORQUE TO 75 FT/LBS
LOCKWASHER
FLATWASHER
HIGH LIFT
CUTTER BLADE
CROSS CUTTER
BLADE
Figure 2-7. High Lift Cutter Blade Installation
7. Lower the machine.
8. Proceed to Section 2.4, Page 5.
2.3 ASSEMBLY INSTRUCTIONS - 48 / 52
/ 61 CUTTER DECK COMPONENTS (ALL
MODELS)
1. Install the left side cutter deck baffle supplied in the
grass catcher Installation Kit as shown in Figure 2-8.
Secure using (2) 3/8-16 x 1" carriage bolts, (2) 3/8"
flatwashers, (2) 3/8-16 elastic stop nuts, (1) 5/16-18
x 1" carriage bolt, (1) 5/16" flatwasher and (1) 5/16-
18 center lock nut.
3/8-16 x 1”
3/8-16 x 1”
5/16-18 x 1”
3/8-16 ELASTIC
STOP NUT
3/8-16 ELASTIC
STOP NUT
5/16-18 CENTER
LOCK NUT
3/8 FLATWASHER
3/8 FLATWASHER
5/16 FLATWASHER
Figure 2-8. Left Side Deck Baffle Installation