background image

LIMITED WARRANTY- COMMERCIAL ACCESSORY

Any part of the Scag commercial accessory manufactured by Scag and found, in the reasonable judgment of Scag, to be defective
in materials or workmanship, will be repaired or replaced by an Authorized Scag Service Dealer without charge for parts and
labor.

The Scag accessory,  including any defective part, must be returned to an Authorized Scag Service Dealer within the warranty
period.  The expense of delivering the accessory to the dealer for warranty work and the expense of returning it back to the
owner after repair or replacement will be paid for by the owner.  Scag’s responsibility in respect to claims is limited to making
the required repairs or replacements, and no claim of breach of warranty shall be cause for cancellation or rescission of the
contract of sale of any Scag machine.  Proof of purchase will be required by the dealer to substantiate any warranty claim.  All
warranty work must be performed by an Authorized Scag Service Dealer.

This warranty is limited to 90 days (excluding grass catcher blower assemblies) from the date of original retail purchase for any
Scag accessory that is used for  commercial purposes, or any other income-producing  purpose including rental use.

Grass catcher blower assembly (excluding the drive belt) warranty is limited to 1 year from the date of original retail purchase.
Parts and labor.

This warranty does not cover any accessory that has been subject to misuse, neglect, negligence, accident, or that has been
operated in any way contrary to the operating  instructions as specified in the Operator's Manual.  The  warranty does not apply
to any damage to the accessory that is the result of improper maintenance, or to any accessory or parts that have not been
assembled or installed as specified in the Operator's Manual.

The warranty does not cover any accessory that has been altered or modified.  In addition, the warranty does not  extend to
repairs made necessary by normal wear, or by the use of parts or accessories which, in the reasonable judgment of Scag, are
either incompatible with the Scag mower or adversely affect its operation, performance or durability.  This warranty does not
cover engines and electric starters, which are warranted separately by their manufacturer.

Scag Power Equipment reserves the right to change or improve the design of any accessory without assuming any obligation
to modify any accessory previously manufactured.

All other implied warranties are limited in duration to the periods specified above. Accordingly, any such implied warranties
including merchantability, fitness for a particular purpose, or otherwise, are disclaimed in their entirety after the expiration of
the appropriate warranty period.  Scag’s obligation under this warranty is strictly and exclusively limited to the repair or
replacement of defective parts and Scag does not assume or authorize anyone to assume for them any other obligation.  Some
states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Scag assumes no responsibility for incidental, consequential or other damages including, but not limited to, expense for
gasoline, oil, expense of delivering the machine to an Authorized Scag Service Dealer and expense of returning it back to the
owner, mechanic’s travel time, telephone or telegram charges, rental of a like product during the time warranty repairs are being
performed, travel, loss or damage to personal property, loss of revenue, loss of use of the mower, loss of time, or inconvenience.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Summary of Contents for GC-F4











Reviews: