Section 5
19
Stringers - Occasional
Low engine RPM
Run engine at full RPM
Blades of Uncut
Grass
Ground speed too fast
Slow speed to adjust for conditions
Wet grass
Cut grass after it has dried out
Dull blades, incorrect sharpening
Sharpen blades
Deck plugged, grass accumulation
Clean underside of deck
Belts slipping
Adjust belt tension
Streaking - Strips of
Dull, worn blades
Sharpen blades
Uncut Grass in Cutting
Path
Incorrect blade sharpening
Sharpen blades
Low engine RPM
Run engine at full RPM
Belt slipping
Adjust belt tension
Deck plugged, grass accumulation
Clean underside of deck
Ground speed too fast
Slow speed to adjust for conditions
Wet grass
Cut grass after it has dried out
Bent blades
Replace blades
Width of Deck
SGB018
CONDITION
CAUSE
CURE
Width of Deck
SGB020
Width
of
Deck
Width
of
Deck
SGB019
Streaking - Strips of
Not enough overlapping
Increase the overlap of each
Uncut Grass Between
between rows
pass
Cutting Paths
TROUBLESHOOTING CUTTING CONDITIONS
