SC2000 PL0978 User'S Installation And Operation Manual Download Page 1

Page: 1 / 73

Page 1

series DVR User’s installation and operation Manual

Edition R1.0

Welcome

Thank you for purchasing our DVR!

This manual is designed to be a reference tool for the installation and operation of your system.

Here you can find information about this serie s DVR features and functions, as well as a detailed

menu tree.

Before installation and operation please read the following safeguards and warnings carefully!

Important Safeguards and Warnings

Do not place heavy objects on the DVR.

Do not let any solid or liquid fall into or infiltrate the DVR.

Please brush printed circuit boards, connectors, fans, machine box and so on regularly. Before

the dust cleaning please switch off the power supply and unplug it.

Do not disassemble or repair the DVR by yourself. Do not replace the components by yourself.

Environment

Please place and use the DVR between 0

℃

and 40

℃

.Avoid direct sunlight. Stay away from heat

source.

Do not install the DVR in damp environment.

Do not use the DVR in smoky or dusty environment.

Avoid collision or strong fall.

Please insure the DVR level installation in a stable workplace.

Please install in ventilated place. Keep the vent clean.

Use within the rating input and output scope.

Summary of Contents for PL0978










































































Search results

Summary of Contents for PL0978

Reviews:

Related manuals for PL0978

Brands by name

Popular brands

SC2000 PL0978, User'S Installation And Operation Manual

Search results

Summary of Contents for PL0978

Reviews:

Related manuals for PL0978

Brands by name

Popular brands