11
/
11
INSTRUCTION MANUAL JUMP STARTER SC POWER SC15
5V USB PORT
Connect the electronic appliance to the USB port of the device and turn the power on. It can deliver 5.0VDC 2.1A to
power up most 5VDC input digital devices like mobile-phone, tablet PC as well as other 5V USB products. ( Original
cable is required for delivering maximum current )
Recommendation:
l
If it is anticipated that the Jump Starters is to be used in very cold conditions, it is recommended that it is kept indoors in
a warm environment. Furthermore, it is recommended that to keep the device on charge for overnight prior to use. It is
also recommended that when preparing for a jumpstart in extremely cold weather that you connect the clips to disabled
vehicle battery and turn the POWER on, then activate the JUMP START feature by depressing the Jump Start button
(JUMP START red light on), then wait for 3-4 minutes prior to cranking the vehicle. This will help activate or “warm” the
disabled vehicle battery for best possible results.
l
Sometimes it may happen that the car engine does not start at the first crank, so we recommended to take several
attempts (no more than 5), so that the battery is warmed up and its performances result enhanced.
l
To grant the best possible performance of the device, it is recommended to recharge it every 3 months, or to refresh it
at least one time within 6 months. If the battery is not fully recharged after use and not regularly charged at the above
stated intervals, the device will not operate properly and may quickly deteriorate.
l
The device is protected from extremely high temperatures, anyway it is not recommended to store it inside the car
compartment during summer time, and recharge it at high ambient temperature. (Please refer to page 4 at point 4 of
this user manual).
