12
7. Measuring Sample
(1) Press the START key to turn on the
SBS-2003, and then press the SELECT
key to move the triangular pointer to
“Temp.” or “S.G.” (Figure 13)
(2) Submerge the tip of the sample tube
into the electrolyte sample. Squeeze and
then release the tube pump a few times to
draw the sample into the sample chamber.
Once the sample is drawn into the unit,
drain it completely, and then refill the
sample into the unit again. This process
will help prevent erroneous readings
resulting from cross contamination with
the previous sample measured. (Figure 14)
Caution!
• To avoid accidental exposure to harmful
chemicals, always wear protective
equipment, such as gloves, eye protection
and/or a face-shield. Understand the
properties and toxicity of the chemical
being handled as well as safe evacuation
or decontamination procedures in case of
emergency.
Figure 13
Figure 14
DIGITAL HYDROMETER
Temp.
Menu
S.G.
Count
SBS -2003
DIGITAL HYDROME
TER
=
Menu
Temp.
S.G.
Count
SBS-2003
Summary of Contents for SBS-2003
Page 33: ...38...
