System Setup
2 AUDIO SETUP PAGE
2.1
2.1.1 DOWNMIX
LT/RT:
The 5.1-channel audio is mixed into left channel and right channel and is output via the FL and FR speaker
respectively.
STEREO:
The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR speaker.
:
This mode creates a virtual surround effect from stereo or multi-channel audio contents.
5.1CH:
Turn off the DOWNMIX mode. If a 5.1CH disc is playing or the unit is connected to 5.1-channel amplifier,
this item should be selected.
NOTE:
This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.1.2 FRONT, CENTER, REAR SPEAKER and SUBWOOFER
Only when the DOWNMIX mode is turned off (
DOWNMIX
is set to
5.1CH
) are the
CENTER SPEAKER
and
REAR
SPEAKER
activated. The
FRONT SPEAKER
can be set to
LARGE
or
SMALL
. The
CENTER
SPEAKER
,
REAR
SPEAKER
can be set to
LARGE
,
SMALL
or
OFF
and the
SUBWOOFER
can be set to
ON
or
OFF
.
NOTE:
If the speaker is set to
LARGE
, the output level will be higher than that of
SMALL
.
If the speaker is set to
SMALL
, the output level will be lower than that of
LARGE
.
If a speaker is set to
OFF
, no audio is outputted from it.
2.1.3 DIALOG
2.1.4 D.R.C
You can set this item to
ON
,
OFF
or
AUTO
.
SPDIF/ OFF:
There will be no digital audio signal output. (Coaxial off)
SPDIF/RAW:
The digital audio signal output will be in its raw format.
SPDIF/PCM:
The digital audio signal output will be in PCM format.
ANALOG AUDIO SETUP
3D SURROUND
When
DOWNMIX
is set to
LT/RT
or
STEREO
, this item is available.
Adjust the value of this item to control the dialog volume.
NOTE:
When playing 5.1CH disc, this item can be used to adjust the volume of the speakers.
2.2. DIGITAL AUDIO SETUP
2.2.1 DIGITAL OUTPUT
-10-
