24
PCI-6771 User's Manual
2.22 Reset switch (CN11)
If you install a reset switch, it should be a single pole switch rated
at 10 mA, 5 V. Momentarily pressing the switch will activate a
reset.
For reset switch pin assignments, please see Appendix C.
2.23 VGA Display Connector (CN12)
The PCI-6771 provides a VGA controller for a high resolution
VGA interface. The PCI-6771 CN12 is a DB-15 connector for
VGA monitor input. Pin assignments for the CRT display are
detailed in Appendix C.
2.24 CPU Fan Power Supply Connector (CN13)
This provides power supply to the optional CPU cooling fan. This
connector is only available when +12 V power is supplied to the
board.
Warning! Before making the connection, make sure the
voltage is absolutely correct and matched with
the correct connector.
different connectors at both ends. On one end is the ATX 20-pin
(female type) which connects to the (male) ATX power supply
source. The other end has a 3-pin connector (female type) which
connects to the ATX feature connector (CN10) on the board itself.
This end also has the 6-pin main power connector (P8) and a 6-
pin connector (P9) which is used when the board is mounted on a
passive backplane.
