28
When disassembling this product, a number of precau-
tionary measures must be taken. Observe the following
warnings and instructions. Please contact your supplier
with any queries.
Disassembly may only be carried out by experienced
fitters. This manual is not intended for DIY enthusiasts
or installers in training.
For more information on these disassembly instruc-
tions, please refer to the chapters regarding installa-
tion in this manual that contain diagrams and detailed
information.
DISASSEMBLY AND REMOVAL OF THE PRODUCT
IMPORTANT
The disassembly of the product at the end
of its useful life must be carried out by
qualified personnel, and in order to carry it
out, the reverse steps that were carried out
for its assembly must be performed.
IMPORTANT
Always act with care. Please only use suit-
able tools that are in perfect condition.
IMPORTANT:
Ensure than you dispose of all pieces of the
product taking into account the nature of its
materials.
• Step 1
Remove the funnels from the guide profiles.
• Step 2
Raise the fabric to its limit switch position.
• Step 3
Loosen the screws at the bottom of the brackets.
• Step 4
Remove the shaft with the rolled-up tarpaulin from the
supports.
• Step 5
Remove the tarpaulin and the windbreaker profile
from the rails.
• Step 6
Loosen the guide rails' anchors to remove the guides.
• Step 7
Loosen the bracket anchors and remove both.
• Step 8
Loosen the screws of the wind-shield profile and
remove the tissues. If no guide rails are used, loosen
the screws on the Tolper end profile and remove the
tarpaulin.
• Step 9
Loosen the screws on the winding tube and remove
the discs from the brackets, the machine or motor and
the bushes.
• Step 10
Finally, loosen the screws on the roller tube and re-
move the cover.
