Saxun ANEAS, Technical Manual, Page: 21 / 28

TECHNICAL MANUAL ANEAS 80x40
21
For best use and extended durability of the screen, it is recom-
mended to carry out regular maintenance and checks at least
once a year, or even more often depending on the wear and
tear caused by wind at the installation site.
To prevent rusting, periodic cleaning of gutters and profiles
using neutral soap is recommended. This should be done at
least once a year and more frequently for materials exposed
to aggressive atmospheric conditions (marine, industrial, air-
borne dust, etc.) It is important to thoroughly rinse the prod-
ucts with water after using detergents to clean them, to avoid
the build-up of salts on the profiles’ surfaces.
The appropriate performance of this periodic maintenance
removes exogenous agents from the profiles’ surface that
may attack their covering and aluminium components, pro-
longing the lifespan of the profiles and maintaining their ap-
pealing aesthetic.
To clean the canvas, we recommend removing the dust that
has accumulated without using water, to enable you to re-
move all the surface particles by vacuuming, air blowing,
beating or brushing.
If you wish to remove finger or grease marks, use water with
neutral soap. If they are water-based marks, clean them with
at most a sponge and rub with a damp cloth.
NEVER use detergents or other chemical products.
Finally, the user must bear in mind the need to check the tight-
ness of the screws in accordance with the tightening torques.
6. MAINTENANCE
6.1. CLEANING AND CARE