www.saxbylighting.com
Instruction manual
92310
Dax CCT Bollard
Saxby Lighting. BH17 7BY
V2 05/06/2020
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
Care and Safety
Technical data
240 V~, 50 Hz
Supply
Voltage:
Bulb
Type:
20W LED module (SMD) CCT, 3000/4200/6000K
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole
luminaire shall be replaced.
Conformity with all relevant EC Directive requirements.
This is a Class 1 product and must be earthed.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is rated at IP65.
IP
65
You have correctly identified the wires.
The connections are tight.
No loose strands have been left out of the connection block.
Check that...
Having correctly identified the wiring from your existing light fitting, pull the mains wire through the hole and connect to the
terminal block(not supplied) in the following way:
Wiring
SUPPLY
LIGHT FITTING
BLUE (N)
NEUTRAL
EARTH
SWITCHED LIVE
BROWN (L)
GREEN / YELLOW
This product is not suitable for dimming.
