h
h
i
j
k
l
m
n
o
Abb. 4
Fig. 4
Abb. 5
Fig. 5
NO CERAMIC STONES
KEINE KERAMIKSTEINE
Heater Stones
Loading stones into the heater
Never use the heater without stones as it may cause fire. Use only manufacturer recommended
SaWo-stones. Using unsuitable stones may lead to heating element damage and will void the warranty.
Never use ceramic stones or other artificial stones of any type!
NOTE:
Heating element damage
due to overheating caused
by wrong kind of stones or
stones which were wrongly
loaded into the heater is
not covered by the factory
warranty.
NOTE:
The main purpose of the stones in the heater unit is to store enough energy to efficiently
vaporize the water thrown on top of the stones to maintain correct humidity in the sauna
room. The stones must be removed at least once a year or every 500 hours which ever occurs
first. All stone crumbles must be removed from the heater unit and replaced with new ones as
described in the heater manual. The required amount of stones is also listed in the manual
provided. See Fig.4.
It is recommended that all stones should be rinsed to remove any stains or dust that can
cause unpleasant odour during the first few times of using the heater. It is important that the
stones are loaded carefully in a way that they do not block air circulation through the heater.
Larger stones that won’t fit between the heating elements must not be forced in place instead
they must be completely removed. Small crumble or stone pieces smaller than 35mm in
diameter must not be loaded into the heater because they will block the air circulation and will
cause overheating and possible heating element damage.
Soapstone Piling
Follow stone piling instructions on the illustration
Fig.5. Corner Top Stones are designed with scent
pockets. Here you can place liquid scents to give
your sauna bathing a pleasant fragrance.
Avoid pouring them while the heater is on, as it
can cause serious burns. Brush the water pocket
and rinse with water after using scents.
