1. Introduction of the Innova Controls
1.1 Precautions
Congratulations on your purchase of Innova Control Unit!
Innova Control Unit is developed to enhance your sauna bathing with a
variety of different features. It can adjust temperature, humidity,
ventilation and light option in your sauna. The Innova Control Units are
available on a separate or built-in mounting on the Power Controller.
The following information provides you with instructions on adjusting the
settings of the control unit. Please, read this instruction manual
carefully before using it. Familiarization of key functions will give you a
more enjoyable sauna experience.
Only a qualified electrician is allowed to make electrical connections and
repairs on the unit. Use original parts only.
Disconnect the Power Controller and the Contactor Unit from the
electrical circuit before installation, opening the lid of the power
controller or contactor unit and repair.
Check power supply rating before installation.
Check the correct location of the sensor in the installation section of the
manual. It is very important to place the temperature sensor correctly
as it closeness to the air ventilation cools down the sensor and may lead
to overheating.
The control unit can be operated in a room temperature 0-40°C. Do not
install the control unit inside the sauna room!
Do not pour water in the control unit or clean it wet cloth. For cleaning
purposes, use a cleaning cloth that has been only slightly moistened
with a mild soapy solvent (dish detergent).
1.
2.
3.
4.
5.
6.
English
2
