Size of the Sauna room
Installation Area
Smoke Fuel
Heater Door
Heater door’s hinge hole
Picture 2: Hinge of heater door
Hinge hole in the
heater body
SAWO
wood burning sauna heater should be installed in a sauna room that follows
If the sauna is made of
bare massive log
and used during winters, the volume must
be multiplied by 1.5 which is bigger than the actual volume. For every
unlined
stone
wall square meter (m²), it increases the volume by 1.2 m². For every door and window
I
suitable proceedings must be done to achieve it(e.g. by using load distributing plate).
By using adjustable legs (optional), it enables to adjust the sauna heater’s position and
lower part of the heater body, to the brackets. Adjust the heater to its position by un-
screwing the lower adjustable legs and lock it with the upper adjustable legs.
resistant.
SAWO
heater is not suitable to be installed into a shared smoke duct system.
connection pipe (see picture 1). Models which have a rear connection opening, can be
by using, for example, suitable mortar or
heaters
are placed inside the furnace during
-
ready on its place. For installing the heater door,
remove the kingpin, place the door in such a
way that the top portion of the heater door is
above and the lower portion of the heater door
is below the holes where the kingpin was.
4