16
Note: Above images are for illustrative reference only and may differ from actual item.
Separate Control Installation
(NS model heaters only)
Sensor Installation
Light Installation
A conduit pipe is provided for the
control unit.
If wanting to fl ush the control unit into
the wall, cut a hole according to your
control unit’s specifi cations. See
heater control manual.
Note: Sensor installation is for Separate
control heater models only.
A pre-drilled hole for the sensor is provided for
separate control heaters.
Sensor is placed directly above the heater.
Refer to the heater control instruction manual
for the sensor installation.
The wall has a pre-drilled hole(s) for the lights.
Insert wire(s) to the conduit(s) provided for the
lights.
When ordering sauna room with NB heater, a
dimmer switch is provided for the light(s).
When using NS heater, refer to the heater control
instruction manual for the light installation.
You can hide the power controller on
the top of the sauna room.
18
19
20
Electrical Layout
Conduit to control unit
Conduit location
Power Controller
Control
Control unit must not be fl ushed to the
wall, near or on the wall where the heater
is installed.
Use control unit interface holder if
necessary.
Refer to heater control instruction manual
for wiring connections.
