Sawn Craft Micro F-22 Manual
Page 10
1311101 Micro F-22 Manual.docx
2.5 Fuselage Installation
Parts Required:
o
Main Wing Assembly
o
Fuselage Assembly
1)
Apply a bead of glue down the entire length of the flat spot on the top rear of the fuselage
assembly. Also apply glue on the inside edges of the main wing assembly fuselage slot.
2)
Press the glued side of the fuselage assembly onto the main wing assembly, sliding the fuse all the
way back, and gently slide the parts back and forth to spread the glue evenly. Check that the front
of the wing that is glued to the side of the fuse is straight and even on both sides of the fuse. Allow
glue to cure before proceeding.
2.6 Vertical Stabilizer Installation
Parts Required:
o
Main Wing Assembly
o
Vertical Stabilizer Assembly
1)
Assemble the Vertical Stab Angle Template & Foot using glue such that the foot and template form
an upside-down tee. Allow the glue to cure prior to proceeding.
Glue
