Page 3
ABOUT THE DOLLY
The yel-Low Safety Dolly allows you to effortlessly
load and move items.
Can move most any item up to 1000 lbs.
It is intended to transport goods. Any use other than
intended use can result in injury or product damage. If
dolly is damaged, defective, or missing parts, it should
be taken out of use until repaired or replaced.
UNPACKING THE DOLLY
When unpacking, CHECK TO MAKE SURE THAT THE DOLLY IS INTACT / UNDAMAGED and that all ordered parts are
included. If any parts are missing or broken, please call Saw Trax Manufacturing as soon as possible at 770-974-0021.
IMPORTANT WARNINGS AND SAFETY PRECAUTIONS
1. Read and understand directions. Failing to follow instructions may result in serious injury or property damage.
2. Use this tool for manufacturer’s recommended use only. Use other than which is described may result in injury
or property damage.
3. Do not exceed 1000 lb. max. weight capacity (base model).
4. CAREFULLY AND SMOOTHLY start, stop and change direction.
5. Be aware that loads in motion have more force/weight than stationary loads. Sudden or rapid load movement
may briefly create excess load force and result in product failure and/or a tipping hazard.
6. EVENLY CENTER YOUR LOAD. This equipment is designed for evenly centered loads. Off-centering of loads
can result in a dangerous operating condition and cause damage or injury.
7. When possible, KEEP LOAD STRAPPED to dolly during transport (E-Strap).
8. Use extreme caution when handling loosely stacked/packaged loads.
9. Do not use when tired or under the influence of drugs or medication.
10. Always look in direction of travel.
11. Use caution when visibility is obstructed by load.
12. Ensure floor is clear of debris when moving a load.
13. When maneuvering a load, watch swing clearance near walls, racks, pillars
and other obstacles.
14. Do not use on uneven or slippery surfaces.
15. Be aware that the casters behave differently without a load than with a load.
16. DO NOT RIDE ON THIS EQUIPMENT. Do not carry passengers.
17. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing,
contact Saw Trax Manufacturing for a replacement.
