Page 12
Required Tools
Ratchet with Deepwell 1/2 in. Socket
Assembly Procedures:
1. Insert one (1) 5/16 in. Carriage Bolt into bolt hole from inside out through wheel bracket and cart body.
(Bolt should drop into provided square cut hole in bracket to allow low profile appearance.) (Figure 2)
2. Place one (1) 5/16 in. Flat Washer on each protruding bolt stud. (Figure 1)
3. Place one (1) 5/16 in. Lock Washer on each protruding bolt stud. (Figure 1)
4. Install one (1) 5/16 in. Lock Nut and one(1) 5/16 in. Hex Nut per Dock Transition Wheel protruding bolt
stud. (Figure 1)
5. Place Fifth Red Swivel Caster onto center threaded cart body studs. (Figure 3)
6. Install one (1) 5/16 in. Flat Washer and three (3) 5/16 Lock Washers on center cart body threaded studs.
7. Install one (1) 5/16 in. Lock Nut onto Flat Washer and three (3) 5/16 Hex Nuts onto Lock Washers on
center cart body threaded studs.
Figure 1 Figure 2
Figure 3
INSTALLING OPTIONAL ADDITIONS (Dock Transition Wheels)
Dock Transition Wheels:
Used to transition the dolly on uneven surfaces like dock transitons to load
trucks. Comes with 2 wheels per opposite ends of the dolly. A 5th red swivel caster will be added to the
center of the dolly body.
Required Materials
1 Red Locking Swivel Caster
4 Dock Transition Wheel with Bracket
8 5/16 in. Carriage Bolt
5 5/16 in. Lock Nut
7 5/16 in. Hex Nut
9 5/16 in. Flat Washer
11 5/16 in. Lock Washer
x 4
x 1
