Savor Pro GD4210S-B1, Assembly, Use And Care Manual, Page: 29 / 30

29
TROUBLE SHOOTING
PROBLÈMES POSSIBLE CAUSE SOLUTIONS
Burner won't light after
turning and pushing the knobs
Electrode deposited
with
cooking residue
Use clean swab and alcohol to clean
Electrode damaged Replace
Electrode wires are loose or
fall off Reconnect or replace with new
electrode assembly with wires
Orifice blocked Check the orifice for blockage
Wire is shorting Replace with new electrode
assembly with wires
Burner can't light by match
No gas Open the LP tank valve/Replace LP
tank valve
Gas flow is not smooth Clear burner tubes
Incorrect assembly between
burner and valve Re-assembly
Yellow or orange flame with
gas odor Incomplete combustion Call our customer service center
Low heat with knob in
position
Gas hose bent or kinked Smooth out the hose
Burner or orifice blocked Clear blockage
Low gas pressure Call the dealer
Grill not pas preheated Preheat the grill for 15 minutes.
Flare-up
Excessive meat fat Cut off fat before grilling
Temp. too high Adjust
Grease deposit Clean
Flame out High winds Find a less windy place
Flame lifting Too high of gas pressure Call the dealer
Flashback Burner port blocked Clean burner port
Grease fire Grease accumulated in food Turn off knobs and LP tank valve.
Leave lid open and let fire burn out.
Clean the grill after cooling.