20
1. Make sure tank valve is in its full off position (turn clockwise to
shut off
).
2. Check tank valve to assure
the threads are not damaged.
(type I connection per
ANSIZ21.81)
3. Make sure all burner knobs are in the off position.
4. Remove the protective cap from L.P. tank valve
.
Always use cap and strap supplied with valve.
5. Inspect valve connection port and regulator assembly. Look for any damage or debris. Remove
any debris. Inspect hose for damage. Never attempt to use damaged equipment. Contact your local
L.P. gas dealer for repair.
6. When connect
ing
regulator assembly to the valve, hand tighten nut
only
Do
not use a wrench to tighten
Use of a wrench may damage
threads
and result in a hazardous condition
(as the figure shown below)
.
7. Open tank valve fully (counterclockwise). Use a soapy water solution to check all connections for
leaks before attempting to light grill. If a leak is found, turn tank valve off and do not use grill until
a local L.P. gas dealer can make repairs.
OPEN HAND WHEEL
ATTENTION
: DISCONNECT THE TANK WHEN GRILL IS NOT IN USE.
near
Summary of Contents for GD4210S-B1
Page 5: ...5 EXPLODED VIEW...