Before Using the Stand Mixer
Using the Stand Mixer
●
Before assembling the appliance, remove and safely discard any packaging material.
●
Wash the
Mixing Bowl
,
Beater
,
Dough Hook
and
Whisk
attachments thoroughly in warm
soapy water with a soft cloth then rinse and dry.
1.
Set the
Speed Control
to 0 before proceeding.
Note: If the Speed Control is not at 0, the machine’s safety feature will be triggered and it
will not activate when switched on. If this happens, see Safety Instructions for how to get
the appliance running.
2.
Press and hold the
Tilt Button
and lift up the
Mixer Head
. Release the tilt button to lock
the head in this position.
3.
Fit the
Mixing Bowl
into the groves on the mixer’s base and turn clockwise to lock into
place. Make sure the bowl is locked securely before going any further.
4.
Fit the
Splash Guard
into the grooves on the
Mixer Head
, aligning the arrow on the
guard to the open padlock symbol on the head. Turn the splash guard clockwise so the
arrow points to the closed padlock symbol to lock it into place. Make sure it is locked
tightly before going any further.
5.
Chose the
Mixing
Attachment
best suited for your recipe.
6.
Line the grooves on the attachment up with the attachment shaft and then press the
attachment in while turning anti-clockwise to lock into place.
7.
Add your ingredients to the
Mixing Bowl
, taking care not to overfill. It is recommended
not to mix more than 1.2kg each time and that when kneading dough the mix is roughly
2 parts flour to 1 part water.
8.
Press and hold in the Tilt Button to unlock the
Mixer Head
and return it to the horizontal
position. Release the tilt button to lock it into place.
9.
Plug the power cord into the mains supply. This will make the
Speed Control
light up
and flash blue.
10.
Turn the
Speed Control
clockwise to select a speed and start mixing. It is recommended
that mixing is started at a lower speed to prevent splattering and then increased to suit
the recipe. Consult the
Mixing Guide
for example speeds.
11.
To use the
Pulse
function, turn the
Speed Control
anti-clockwise from the off position,
holding it in place for longer pulses. Do not use the pulse function for more than 30
seconds at a time.
12.
Occasionally stop the mixer during operation and scrape any mixture down the sides
of the
Mixing Bowl
with a spatula.
13.
When mixing is complete, return the
Speed Control
to the 0 position and unplug the
appliance from the power supply.
14.
Lift up the
Mixer Head
as described earlier and remove the
Attachment
by pushing it
in and rotating it clockwise.
SavistoStandMixer-Manual.indd 5
01/04/2016 12:08:37